Bambu Dual-Texture PEI Plate

$26.99 USD

Quantity:
Order Info
  • Order will be shipped out from Chinese warehouse in 1-3 business days once being processed.
Bambu Textured PEI Plate, Excellent first-layer adhesion, Improved durability Bambu Textured PEI Plate, Excellent first-layer adhesion, Improved durability

Two Textures (Textured and Smooth) in One Plate

Enjoy the benefits of two different textures in one plate, one side is Textured PEI surface and the other side is Smooth PEI surface. This Plate features a 0.5mm magnetic stainless steel plate that enhances magnetic adhesion and helps to prevent warping and ensure optimal print quality during 3D printing.

Smooth PEI surface:

High Z-axis Precision Printing

Smooth PEI surface contributes to improved Z-axis precision during the printing process, ensuring greater accuracy and consistency in the vertical dimension.
Surface Finish Surface Finish

Smooth and Matte Surface Finish

The use of a specially selected matte PEI sheet can impart a smooth and matte texture to the bottom surface of the printed object, enhancing its overall appearance.

Textured PEI surface:

Excellent First-layer Adhesion and Improved Durability

Textured PEI surface has enhanced the durability, and improved the adhesion between the prints and the plate, eliminating the need for adhesives.
*In some situations, glue is required for very specific filaments
Surface Finish Surface Finish

Self-release when Cooled Down

Textured PEI surface can withstand the repeated heating and cooling cycles of a printer heatbed. Prints come off easily when the temperature of the heatbed reaches room temperature.

Considerations

  • Deposition of dust and grease on the build plate decrease adhesion. It is recommended to regularly clean the surface with detergent and water to to maintain best adhesion.
  • Increasing heatbed temperature enhances adhesion. Users need to adjust the temperature of the heatbed based on their specific requirements in order to achieve the most suitable level of adhesion.
  • Carefully sanding the Textured PEI surface with fine-grit (600 was recommended) sandpaper can help restore adhesion.
  • If bubbles appear on the bottom of the Smooth PEI sheet, heating it on the heatbed at a temperature of no less than 80 degrees for several hours can be helpful in eliminating the bubbles.
  • Do not clean the Bambu Dual-Texture PEI Plate with Acetone, as it will damage the PEI surface.
  • Bambu Lab recommends only using Bambu Lab official glue on the Bambu Lab build plates, and can not be held responsible for any damage caused to plates as a result of using third-party glue on build plates. 
  • Always wait for a few minutes before removing printed models to allow the plate to cool down for easy print removal. This prevents damage to the plate and ensures a long lifetime of the product.
  • The Bambu Dual-Texture PEI Plate is considered a consumable part, which will degrade over time. The warranty will only cover manufacturing defects, not cosmetic damage like scratches, dents, or cracks. Defective sheets upon arrival are the only ones covered by the warranty.

 

Recommended Settings

Please note that other slicer settings might need to be adjusted based on the printed model and the filament requirements

Materials Heatbed Temperature Glue Stick Required for  Smooth PEI Surface? Glue Stick Required for Textured PEI Surface?
PLA/PLA-CF/PLA-GF 45~65℃ No No
PETG/PETG-CF 60~80℃ Glue Stick/Liquid Glue No
ABS 90~100℃ Glue Stick/Liquid Glue No
ASA 90~100℃ Glue Stick/Liquid Glue No
TPU 35~45℃ Glue Stick/Liquid Glue Glue Stick/Liquid Glue
PVA 45~60℃ Glue Stick/Liquid Glue No
PC/PC-CF 90~110℃ Glue Stick Glue Stick
PA/PA-CF/PAHT-CF 90~110℃ Glue Stick Glue Stick
PET-CF 80~100℃ Glue Stick/Liquid Glue No

Installation Steps

Step 1: Align the plate with the fixed points of the platform with the name of the plate facing you Step 1: Align the plate with the fixed points of the platform with the name of the plate facing you

Step 1: Align the plate with the fixed points of the platform with the name of the plate facing you

Step 2: Lower the plate and secure to the magnetic platform Step 2: Lower the plate and secure to the magnetic platform

Step 2: Lower the plate and secure to the magnetic platform

Product Specification

Material
PEI powder coating+ magnetic Stainless Steel Plate + Smooth PEI Sheet
Textured PEI coating/PEI sheet thickness
0.075 mm/
0.125 mm
Color
Gold, 
Charcoal grey
Flexible spring steel thickness
0.5 mm
Usable print size
256*256 mm
Package size
300*270*17mm
Package weight
0.45kg
$26.99 USD
General Inquiry
Technical Support