Introduction
Bring your images to life! By combining 3D printing technology with the PLA CMYK Lithophane Bundle, you can effortlessly design and create stunning Lithophane artworks at home. Simply use the Lithophane LED Backlight Board Kit to illuminate your creations and make them truly shine. Long press the switch on the LED Backlight Board to adjust the brightness and achieve the perfect illumination for your artwork.
Please note that Make My Litophane is currently in a private beta phase. To use Make My Lithophane, you need to submit an application. Apply to use Make My Lithophane.
Bring colors to your lithophane
6 Litophane Styles to Choose From
|
Product ID
|
L (mm)
Total Length |
W (mm)
Width |
Total Number of LEDs
|
| KC009 | 96 | 144 | 96 |
| KC010 | 192 | 144 | 192 |
Basic Information
| Number of LEDs | 48/pcs |
| Connector Model | PH2.0 x 2 |
| Voltage | 5V |
| Current | 2A |
In the Box
| Item for Lithophane LED Backlight Board Kit (2PCS) - KC009 | Qty |
|
2PCS |
|
1PCS |
|
1PCS |
| Item for Lithophane LED Backlight Board Kit (4PCS) - KC010 | Qty |
|
4PCS |
|
3PCS |
|
1PCS |
Considerations
-
Smaller nozzle sizes and lower layer heights are essential to achieve better printing results. We suggest using 0.2mm or 0.4mm nozzle sizes and layer heights between 0.08mm and 0.12mm. If you use other tools to generate the lithophane model, you may need to configure the print profile to optimize the result. Please check CMYK Lithophane Printing Guide on Wiki.
-
Due to the limitations of printing layers and resolution, there may be some color deviation between the actual image and the lithophane prints.
-
To prevent warping, the recommended heated bed temperature is between 45-50℃.